ARC AIR Electrical and Air ConditioningCall 01276 786894

ARC AIR professional services

Consumer Unit Upgrades

Modern consumer-unit replacement and upgrading, carefully assessed, installed and tested for improved electrical protection.

✓ 20+ years’ electrical experience✓ Domestic & commercial work✓ Clear written quotations

What’s included

A careful, straightforward approach.

✓ Assessment of the existing installation✓ Modern protective devices where appropriate✓ Neat circuit identification and labelling✓ Testing and certification after installation

How it works

From enquiry to completion.

  1. 1Inspect the existing board and installation
  2. 2Explain any testing or remedial requirements
  3. 3Provide a written quotation
  4. 4Replace, test, label and hand over

Is an upgrade appropriate?

Signs an older fuse board needs assessment

Reasons for assessment can include rewireable fuses, damaged or deteriorated equipment, missing or limited residual-current protection, poor circuit identification, recurring tripping, or planned work that changes the installation.

Replacement is recommended only after the existing board and installation have been considered; an older appearance alone does not prove that a consumer unit is unsafe.

What happens

From survey to certification

ARC AIR inspects the existing consumer unit, discusses the circuits and any known faults, and explains whether preliminary testing or remedial work is needed.

On the agreed day the supply is isolated, the board is replaced, circuits are connected and labelled, and the work is inspected and tested before handover. Any defects outside the agreed scope are reported clearly.

Common reasons

Why homeowners choose to upgrade

Typical reasons include improving circuit protection, supporting alterations or new circuits, addressing deterioration, improving circuit separation, or completing remedial work identified during inspection and testing.

✓ Old fuse boards✓ Limited RCD protection✓ Planned new circuits✓ Repeated tripping✓ Poor labels or damaged equipment✓ EICR remedial work

Why choose ARC AIR?

20+ years of practical electrical experience.

Assessment before replacement

An older fuse board is not condemned by age alone. ARC AIR assesses its condition, protective devices, circuit identification and the wider installation before recommending work.

Modern circuit protection

A replacement may use RCD and RCBO protection as appropriate to the design, helping faults be isolated and circuits protected correctly.

Tested and documented

The work includes inspection, testing, circuit labelling and the appropriate certification, with any limitations or remedial items explained.

Frequently asked questions

Helpful information about consumer units

Do I need a new consumer unit?

Not simply because a fuse board is old. Its condition, the protection provided, test results, signs of damage and any planned new circuits should be assessed before an upgrade is recommended.

What are RCDs and RCBOs?

They are protective devices. An RCD can protect a group of circuits, while an RCBO combines residual-current and overcurrent protection for an individual circuit. The appropriate arrangement depends on the installation and current requirements.

Will the electricity be switched off?

Yes, power normally needs to be isolated during replacement. The expected interruption will be discussed beforehand.

Is testing and certification included?

The new consumer unit and associated work are inspected and tested, circuits are identified, and the appropriate electrical certification is provided.

Can an EICR be useful before an upgrade?

Yes. Where the condition of the wider installation is uncertain, inspection and testing can identify issues that should be considered before or alongside replacement.

Completed work

Genuine ARC AIR projects

Need electrical help?

Tell ARC AIR what is happening, where the property is and the best way to contact you.

Get a Free QuoteCall ARC AIR · 01276 786894
WhatsApp us
Call ARC AIRElectrical Enquiry